Description Of Symbols - Silverline 900W Manual Del Usario

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Class I construction (protective earth)
DO NOT use in rain or damp environments!
MAX
Maximum load
150
kg
For indoors use only!
T-130˚
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
Conforms to relevant legislation and safety standards.
Caution!
WARNING
LIFTING HAZARD
Single Person Lift could cause injury
Use assistance when moving or lifting
WARNING: This product is heavy and as a precaution it is
advised that two people assemble the machine.
4
442463_Z1MANPRO1.indd 4
Original Instructions
Technical Abbreviations Key
V Volts
~ Alternating current
A Ampere
n
Rated speed
Hz Hertz
W, kW
Watt, kilowatt
/min or min
-1 (revolutions or reciprocation) per minute
Specification
Voltage: ........................................................... 230-240V~ 50Hz
Power: ............................................................................. 900W
Maximum lifting capacity: ................... 500kg with return pulley
Maximum lifting height: ............................6m with return pulley
Average lifting speed: ........................ 0.6 m/s with return pulley
Ingress protection: .............................................................. IP54
Protection class: ........................................................................
Weight: ........................................................................... 16.5kg
The sound intensity level for the operator may exceed 85dB(A) and
sound protection measures are necessary.
As part of our ongoing product development, specifications of Silverline
products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds
85dB(A) and limit the time of exposure if necessary. If sound levels are
uncomfortable, even with ear protection, stop using the tool immediately
and check the ear protection is correctly fitted and provides the correct level
of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of
touch, numbness, tingling and reduced ability to grip. Long term exposure
can lead to a chronic condition. If necessary, limit the length of time
exposed to vibration and use anti-vibration gloves. Do not operate the tool
with hands below a normal comfortable temperature, as vibration will have
a greater effect. Use the figures provided in the specification relating to
vibration to calculate the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according
to EN60745 or similar international standards. The figures represent
normal use for the tool in normal working conditions. A poorly maintained,
incorrectly assembled, or misused tool, may produce increased levels of
noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users
who use tools for long periods of time.
250kg without return pulley
12m without return pulley
1.3 m/s without return pulley
23/04/2015 09:15