Description Of Symbols; General Safety - Silverline Silver Storm 264782 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has unique
features and, even if you are familiar with similar products, it is necessary to read
this manual carefully to ensure you fully understand the instructions. Ensure all
users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction Manual
DO NOT hook the cable onto itself, doing so will damage the cable
WARNING: Moving parts can cause crush and cut injuries.
DO NOT place body parts through the hook. Limbs may get caught
and be pulled into the fairlead or drum
DO NOT use in rain or damp environments!
Class I construction (protective earth)
Caution!
WARNING LIFTING HAZARD
Single Person Lift could cause injury. Use assistance when moving
or lifting WARNING: This product is heavy and as a precaution it is
advised that two people assemble the machine.
MAX
Maximum load
150kg
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice
Technical Abbreviations Key
V
~
A
n
o
Hz
W, kW
/min or min -1
4
Volts
Alternating current
Ampere
No load speed
Hertz
Watt, kilowatt
(revolutions or reciprocation) per minute
Original Instructions
Specification
Voltage:..................................................................................... 230V~
Frequency: .................................................................................. 50Hz
Power: ...................................................................................... 500W
Maximum loading capacity: ...................................................... 250kg
Maximum lifting capacity: ............................. 250kg with return pulley
Maximum lifting height: ....................... 6m with return pulley (250kg)
Average lifting speed: ................... 4m/min with return pulley (250kg)
8m/min without return pulley (125kg)
Protection class: ..........................................................................
Weight: .................................................................................... 9.66kg
As part of our ongoing product development, specifications of Silverline
products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use for
the tool in normal working conditions. A poorly maintained, incorrectly assembled,
or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods
of time.

General Safety

WARNING! When using electric power tools, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal injury
including the following safety information. Read all these instructions before
attempting to operate this product and save these instructions for future use.
WARNING: This appliance is not intended for use by persons (including children)
with reduced, physical or mental capabilities or lack of experience or knowledge
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children must be supervised to
ensure that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1 - Keep work area clear - Cluttered areas and benches invite injuries
2 - Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3 - Guard against electric shock - Avoid body contact with earthed or grounded
surfaces (e.g. pipes, radiators, ranges, refrigerators)
125kg without return pulley
12m without return pulley (125kg)