Blade Switch; Ignition Switch; Service Meter; Seat Adjustment Lever - Husqvarna MZ48 Manual Del Operador

CONTROLS
Choke Control
For cold starts, pull the control up.

Blade Switch

pressed down.

Ignition Switch

and is used to start and stop the engine. On
14

Service Meter

hours the engine has run and indicates when the
engine and mower need servicing.
Note: The service meter operates (clocks hours)
only when the engine is running. Be sure to turn
meter hours from accumulating.

Seat Adjustment Lever

under the front edge of the seat is moved to the
IMPORTANT INFORMATION Seat must not
be adjusted while unit is in motion.
LUBRICACIÓN
3.
el motor en marcha, mueva lentamente
el control direccional en ambos sentidos,
si fuera necesario después de parar el motor.
4.
a velocidades normales, se considera purgado.
5.
se debe comprobar el nivel de aceite cuando
corresponda.
71