Specifications - Rockford Fosgate 250M Instalación Y Funcionamiento

S
PECIFICATIONS
MODEL
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Mono
2Ω Load Mono
Signal-to-Noise Ratio
Crossover Slope
Crossover Frequency
Dimensions: (with Endbell)
Height
Width
Length
Frequency Response
Bandwidth
Damping Factor @ 4Ω (at output connector )
Slew Rate
IM Distortion (IHF)
Source Unit Compatibility (+15dB gain overlap)
Acceptable Signal Voltage Range
Protection
Battery Fusing Rates (External to Amplifier)
Fuse Type
Equalization (45Hz Punch Bass)
Input Impedance
Specifications subject to change without notice
10
POWER 250M
>100dB A-weighted
24dB/octave Butterworth
variable from 50Hz to 250Hz
11.35 (28.83cm)
20Hz to 20kHz ±0.5dB
10Hz to 200kHz ±3dB
17V max. (low level in)
Variable from 250mV to 6V (RCA)
NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
Variable from 0dB to +18dB @ 45Hz
125 Watts
250 Watts
2.60" (6.60cm)
9.8" (24.89cm)
>200
30 Volts/ms
<0.05%
15 amps
ATC
20k ohms