Functional Description - Makita DA4000LR Manual De Instrucciones

Taladro angular
Ocultar thumbs Ver también para DA4000LR:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
Symbols
The followings show the symbols used for tool.
volts
amperes
hertz
alternating current
no load speed
Class II Construction
revolutions or reciprocation per minute

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on
the tool.
Switch action
003022
CAUTION:
Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
USD201-2
1. Switch trigger
1
Reversing switch action
A
1
B
003029
This tool has a reversing switch to change the direction
of rotation. Move the reversing switch lever to the A side
for clockwise rotation or the B side for counterclockwise
rotation.
CAUTION:
Always check the direction of rotation before
operation.
Use the reversing switch only after the tool comes
to a complete stop. Changing the direction of
rotation before the tool stops may damage the tool.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing side grip (auxiliary handle)
CAUTION:
Always use the side grip and hold it with both
hands to ensure operating safety.
Use of it with angle attachment
003044
Screw the side grip for the angle attachment on the
angle housing. Then tighten the side grip by turning
clockwise at the desired position.
4
1. Reversing
switch lever

Publicidad

Tabla de contenido
loading

Tabla de contenido