ASROCK X299 Killer SLI/ac Manual De Instrucciones página 29

ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 3)
TPM Header
(17-pin TPMS1)
(see p.1, No. 23)
Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 24)
RGB LED Headers
(4-pin RGB_LED1)
(see p.1, No. 25)
(4-pin RGB_LED2)
(see p.1, No. 8)
1
1
1
12V G R B
1
12V
G
R
B
X299 Killer SLI/ac
This motherboard
provides an 8-pin ATX
12V power connector. To
use a 4-pin ATX power
supply, please plug it along
Pin 1 and Pin 5.
This connector supports Trusted
Platform Module (TPM) system,
which can securely store keys,
digital certificates, passwords,
and data. A TPM system also
helps enhance network security,
protects digital identities, and
ensures platform integrity.
Please connect a Thunderbolt™
add-in card (AIC) to this
connector via the GPIO cable.
These two RGB headers are used
to connect RGB LED extension
cable which allows
users to choose from various LED
lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 34 for
further instructions on these two
headers.
27