Therapy Data; Data Transmission - ResMed Lumis Serie Guia Del Usuario

Dispositivos de presión positiva en las vías respiratorias de doble nivel
Ocultar thumbs Ver también para Lumis Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 147
3. Close the humidifier and insert it into the side of the device.
4. Connect the free end of the air tubing firmly onto the assembled mask.

Therapy data

Your Lumis device records your therapy data for you and your care provider so they can view and
make changes to your therapy if required. The data is recorded and then transferred to your care
provider wirelessly, if a wireless network is available, or via an SD card.

Data transmission

Your Lumis device has the capability of wireless communication so that your therapy data can be
transmitted to your care provider to improve the quality of your treatment. This is an optional feature
that will only be available if you choose to benefit from it and if a wireless network is available. It
also allows your care provider to update your therapy settings in a more timely manner or upgrade
your device software to ensure you receive the best therapy possible.
The data is usually transmitted after therapy has stopped. In order to make sure that your data is
transferred, leave your device connected to the mains power at all times and make sure that it is not
in Airplane Mode.
Notes:
Therapy data might not be transmitted if you use it outside of the country or region of purchase.
Wireless communication depends on network availability.
Devices with wireless communication might not be available in all regions.
SD card
An alternative way for your therapy data to be transferred to your care provider is via the SD card.
Your care provider may ask you to send the SD card by mail or to bring it in. When instructed by
your care provider, remove the SD card.
Do not remove the SD card from the device when the SD light is flashing because data is being
written to the card.
To remove the SD card:
1. Open the SD card cover.
2. Push in the SD card to release it. Remove the SD card from the device.
Place the SD card in the protective folder and send it back to your care provider.
For more information on the SD card refer to the SD card protective folder provided with your
device.
Note: The SD card should not be used for any other purpose.
English
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lumis 100 vpap stLumis 150 vpap st

Tabla de contenido