Tabla de contenido
Publicidad
Removing Clogs
Hose
Tuyau
Manguera
Cover
(Suction Inlet)
Couvercle
(entrée
d'aspiration)
Cubierta
(Abertura de
aspiración)
Short Hose
Tuyau court
Manguera
corta
Short Hose
Tuyau court
Manguera
corta
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Unplug vacuum.
Pull open suction inlet cover and
check for clogging.
Disconnect wand from short hose
and check wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in
and out to remove clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate.
Remove short hose from nozzle by
lifting straight up.
Inspect hose end and clear any
obstructions.
Reinstall short hose and lower plate.
- 36 -
Publicidad
Tabla de contenido
