Installation - Sagi KP12Q Manual De Uso

On the shelves the maximum distributed weight is not to exceed 20 kg.
WARNING: glass Breaking Hazard: Close or open the door VERY GENTLY AND NEVER ABRUPTLY OR
WITH VIOLENCE and do not lean on the door itself.
The cleaning and mantainance of the refrigerating engine and the compressor area needs the intervention of
a skilled technician, therefore it cannot be done by other persons.
For a maintenance intervention or in case of anomaly disconnect completely the machine; ask for the
TECHNICAL SERVICE to an entitled center and the use of original spare parts.
Failure to comply with what is written above may compromise the safety of the units.

INSTALLATION

The units are always shipped on pallets and protected by cardboard boxes.
On receiving and after having unpacked in case of dammages or missing pieces act as described in the
chapter "GENERAL NOTES BY THE DELIVERY".
All setting up and starting operations are to be carried out by skilled staff.
WARNING: package parts (plastic bags, polystyrene foam, nails and the like) are dangerous for children and
must not be left within their reach.
Lift the unit with a forklift and move it to its place of installation paying close attention that the load is well
balanced.
WARNING: overturning hazard: Never tilt the unit. During handling make sure that it is stabilised by qualified
personnel.
WARNING: never transport the unit in a horizontal position; such an operation could cause damage to the
structure and or to the operational plant.
Once at the installation site, follow the instructions below.
Remove the packing box, adhesive tape and any styrofoam pieces.
Remove the plate behind the appliance.
4