GE GFW490 Manual Del Propietario E Instrucciones De Instalación página 11

14
Tumble Care
15
(Depending on model)
Stain Removal Guide
Grass Dirt Blood Tomato
Select Cycle and Push Button for Stain Options
16
17
18
Tumble Care
(on some models)
Freshly tumbles your garments
periodically for up to 8 hours after the
wash cycle is complete to lessen the
setting of wrinkles and creases when
you are not able to move clothing to
the dryer right away.
Stain Removal Guide
The Stain Removal Guide is pre-
programmed with the ideal wash and
rinse settings to tackle five common
stains: grass, dirt, blood, tomato, and
coffee or wine. To use this feature,
Coffee
select the desired wash cycle and then
press the Stain Removal Guide button
until the stain you want to remove is
highlighted. Once selected, press the
Start button to start the cycle.
Basket Light
(on some models)
The basket light will turn on and remain
on for 5 minutes when the door opens,
Start/Pause button is pressed, or by
pressing the Light button.
Volume
This button has two functions:
To change the loudness of the end of
cycle signal, press the button as many
times as needed to reach the desired
volume. There are four sound levels
including OFF.
Lock Control
You can lock the controls to prevent
any selections from being made. Or
you can lock or unlock the controls
after you have started a cycle.
Children cannot accidentally start the
washer by touching buttons with this
option selected.
To lock the washer, press and hold the
Lock Control button for 3 seconds.
GEAppliances.com
At the end of the cycle, the display
will scroll "END" and after ten minutes
the Tumble Care will begin. It can be
stopped at any time by pressing the
Power button.
Note: The Tumble Care option cannot
be added to the My Cycle feature.
For some stains, a prewash will be
selected automatically. Be sure to
add liquid or powder high-efficiency
detergent, or the proper wash additive
to the prewash dispenser.
The basket light can be turned off by
pressing and holding the Light button.
To turn the button sounds ON/OFF,
press and hold the button for 3
seconds.
To unlock the washer controls, press
and hold the Lock Control button for 3
seconds.
A sound is made to indicate the lock/
unlock status.
The indicator light above the button
will illuminate when the controls are
locked.
NOTE: The Power button can still be
used when the machine is locked.
11