Garland HUNTER 765 SB Manual De Instrucciones página 32

English
Do not modify the machine controls or regulations of
the engine speed.
Remove all keys or hand tools from the
machine and the work area before starting
the machine. A wrench or tool left near the
machine may be touched by a part of the machine
in motion and could project itself causing personal
injury.
Do not exceed yourself. Keep both feet firmly in place
on the ground and maintain balance at all times. Do
not use this machine on slopes of more than 15°.
Cutting on mounds can be dangerous. Stay alert
when working or moving on bumpy ground or wet
grass. Be especially careful when changing direction
on a slope.
Do not put hands or feet under the lawnmower.
Keep all parts of body away from the blade when the
machine is running. Before starting the lawnmower,
be sure that the blade is not in contact with any
object.
Keep all parts of body away from cutting elements
and moving parts when the machine is running.
Before starting the machine, make sure that the
cutting element is not in contact with any object. A
moment of carelessness during the performance of
the machine may cause your clothing or other part of
the body to be cut by a cutter from the tool.
Hold the lawnmower with both hands on the
handlebar and always put your body behind the
lawnmower.
If you are an inexperienced user, we recommend first
practicing on a flat surface.
If the machine vibrates abnormally, stop the engine,
inspect the machine and look for the possible
cause and repair. If you cannot find the cause of the
problem take the machine to the service technician.
Do not touch the machine's exhaust pipe while
the engine is running or shortly after stopping it.
The exhaust pipe of this machine reaches high
temperatures during operation of the engine and
maintains these high temperatures for a few minutes
after stopping it.
Do not leave the machine running unattended. If you
have to leave the machine unattended, turn off motor,
wait for the cutter to stop and unplug the wire from
the spark plug.
Do not attempt to remove the cut material from the
work area while cutting tool is in motion. Be sure
that the machine is switched off when performing
debris cleanup.
Store idle tools out of the reach of children.
2.2.1. WORK AND SAFETY CLOTHING
Dress properly. Do not wear loose clothing or
jewelery. Keep your hair, clothing and gloves away
from moving parts. Loose clothing, jewelry or long
hair can be caught in moving parts.
Use this machine with appropriate footwear. Never
32/176