Fulgor Milano FD6W24FI1 Instrucciones De Instalación página 18

EN
Do not cut the inlet hose (see fi g. 5-06).
If the hose is cut, the dishwasher will not work, water will leak and you may be
injured.
If the hose is too long, wind it up tidily and place it behind the appliance.
The cable harness and electrical components must not come into contact with
the hydraulic system and the water inlet and drain hoses.
When connecting the dishwasher drain hose to the sink make sure that the
hose is not bent (ref. A fi g. 5-07) in order to prevent cracks or breakages that
could damage it.
16
INSTALLATION INSTRUCTION
A
Fig. 5-06
Fig. 5-07