Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Examples of some well-used settings
Subwoofer Level Setting
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3
Turn the volume knob to select [SUBWOOFER SET], then press the knob.
4
Turn the volume knob to select [SW SET ON], then press the knob.
5
Turn the volume knob to select [SUB-W LEVEL], then press the knob.
6
Turn the volume knob to adjust the subwoofer level, then press the
knob.
7
Press and hold
to exit.
Note:
You need to set [SWITCH PREOUT] to [SUB-W] in standby mode before you can
make the above settings.
Illumination Color Setting
You can set your preferred illumination color for each zone.
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [DISPLAY], then press the knob.
3
Turn the volume knob to select [COLOR SELECT], then press the knob.
4
Turn the volume knob to select a zone ([ALL ZONE], [ZONE 1], [ZONE 2]),
then press the knob.
5
Turn the volume knob to select a color for the selected zone, then
press the knob.
[INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/
[RED1]/[RED2]/[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/
[PURPLE4]/[BLUE1]/[BLUE2]/[BLUE3]/[SKYBLUE1]/
[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/[AQUA2]/[GREEN1]/
[GREEN2]/[GREEN3]/[YELLOWGREEN1]/[YELLOWGREEN2]/
[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]
11
Publicidad
Tabla de contenido
