Toyotomi Zibro LC-150 Instrucciones De Uso página 19

• aximum of 3 programs per day can be set.
• Every day of the week can be programmed separately.
• inimum switching interval, 1 hour.
• inimum activation time, 1 hour.
• Choice between manual and timer.
• Settings are saved in the memory and remain saved without power supply.
PROGRAMMING THE WEEKLY TIMER
Make sure the heater is connected to the mains and not
burning. Press the timer-key
and day are set correctly. Choose the day you would like
to program by pressing the adjustment keys
adjustment key to increase the day by one step and press
the key to decrease the day.
Press extension/day/set
display shows:
With the adjustment keys
between the programs P1, P2 and P3. You can also choose the
option Copy to copying the setting from one day to another.
Press extension/day/set
Use the adjustment keys
heater must ignite. Press the adjusment key
hour and the key to decrease the hour. Press extension/
day/set to select the right hour.
Then, use the adjustment keys
adjustment key to increase the minute and the key
decrease the minute. Press extension/day/set
right minute.
Use the adjustment keys
heater must shutt off.
Press the adjusment key
to decrease the hour.
Press extension/day/set
set room
. Also make sure the time
to select the desired day. The
and you can choose
to select the displayed program.
to set the hour at which the
to increase the
to set the minute. Press the
to select the
to set the hour at which the
to increase the hour and the key
to select the right hour.
. Press the
to
¹
4
7