User Guide
General Security Note
Attention: For carefree and safe use of this product,
please read this manual and safety information carefully
and follow the instructions. Technical manipulation of the
product or any changes to the product are forbidden,
due to security and approval issues. Please take care to
set up the device correctly - consult your user guide.
Children should use the device only under adult
supervision.
Important: the TAKE 6 must be used according the
instructions in this manual and is not suitable for other
purposes.
Avoid the following
• strong mechanical wear and tear
• high temperature
• strong vibrations
• high humidity
Please also respect the additional security notes in the
various user guide chapters. To ensure correct set up
please read the manual and security notes carefully.
Battery install and change
The device may only be used with 2x AAA Alkaline
batteries - never try to connect to another power supply.
When inserting batteries be sure the right polarity is used.
Remove the batteries when the device is not used for a
longer period. Make sure that the batteries are not short
circuited and are not disposed in fire (danger of
explosion). Batteries do not belong in children hands.
Don't let batteries lay around openly - they might be
swallowed by children or animals. If this happens see a
doctor immediately.
Disposal of batteries:
Batteries are special waste and do not belong in general
household waste disposal. Leaking or damaged batteries
can upon contact with skin cause burning or acid
damage - if necessary use suitable gloves. Please dispose
of batteries in accordance with local bylaws.
Contents
brands
4.3. Automatic code search for all brands
4.4. Manual code search
4.5 Learning codes
4.6. Identifying codes found
4.7 Volume Control Punch Through
4.8 ebode / X10 Home Automation Control (optional)
4.9 ebode / X10 IR Link (optional)
5. Troubleshooting
6. Tips & Tricks about learning IR codes to a remote
13-3-2014
3
ebode TAKE6 IR/RF