USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
allows you to follow the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. t he measurement is performed in hours and
minutes (totalizer 1), in minutes only (hand 2) and
in seconds and
/
of a second (hand 3).
1
4
3. r eset the chronograph to zero by pressing pushpiece B.
16
II. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
allows you to follow the measurement in seconds.
2. t o interrupt the measurement, press pushpiece A
once more. t o restart the time measurement, press
pushpiece A. t his procedure makes it possible to
add several short times.
3. t he chronograph is reset to zero by pressing push-
piece B, once the final measurement has been stopped.
17