Sony HT-CT370 Manual De Instrucciones página 7

2
Prepare screws (not supplied) that are suitable for the holes
on the back of the wall mounting brackets.
4 mm (3/16 in)
More than 25 mm (1 in)
4.4 mm
(3/16 in)
9.8 mm
(13/32 in)
Hole on the wall mounting bracket
3
Fasten the screws to two studs in the wall.
The screws should protrude 6 to 7 mm (approx. 1/4 in).
HT-CT370: 652 mm (25 7/10 in)
HT-CT770: 605 mm (23 17/20 in)
6 to 7 mm
(approx.
1/4 in)
4
Hang the wall mounting brackets fixed on the Bar Speaker on
the screws.
Align the holes in the wall mounting brackets with the screws,
then hang the Bar Speaker on the two screws.
Tip
The Bar Speaker automatically detects whether it is mounted on a wall or
positioned flat, and it optimizes the sound for its orientation.
7
US