Descargar Imprimir esta página

Orbegozo BP 5000 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

BP 5000
− Do not use the heater on extremely deep-pile
carpets!
− Do not use the heater in an upright position.
− There is tip over switch on the base. When the heater
tips
over,
automatically.
− WARNING: do not use the product after a short
circuit
OPERATION
• Before plugging into the socket, be sure both switches are in the OFF position.
• Plug the device and select 400W by pressing the lower or upper switch respectively. For
full power 800W, please press both lower and upper switches. When finished using it, place
the switch in position OFF and disconnect from the network.
• If the heater is not in use and you want to store it, wait until the heater is cool. Then,
store it.
CLEANING AND MAINTENANCE
− This appliance does not require any particular maintenance. Before undertaking any
maintenance operation, disconnect the appliance from the power supply.
− For cleaning it is recommended to use a soft moist rag and neutral detergent. Do not use
an abrasive cloth or devices which could affect the outward appearance of the appliance.
Check that the parts exposed to the heat rays and the ventilation are free of dust and
dirt.
− During cleaning, be careful not to touch the quartz heating elements.
− Store in a cool dry place when not in use.
the
electricity
will
be
turned
off
16

Publicidad

loading