American Standard 6516 Serie Instrucciones De Instalación

INSTALLATION INSTRUCTIONS
Greenbrook Urinal
6516 Top Spud & 6517 Back Spud Series
Thank you for selecting American Standard – the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require professional
help.) Also be sure your installation conforms to local codes.
BEFORE YOU BEGIN
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTES:
• Pictures may not exactly define contour of china and components.
• Observe all local plumbing and building codes.
• Refer to local codes and manufacturer's instructions for flush valve requirements.
• Carefully inspect the new urinal for damage.
• Fixture dimensions are nominal and conform to tolerances by ASME Standard A112.19.2.
• Site preparation may require additional tools and hardware.
RECOMMENDED TOOLS AND MATERIALS
Safety Glasses Tape Measure
Thread Sealant 1/4" Ratchet
6516 Top Spud
108 mm to 133 mm
(4-1/4" to 5-1/4")
MANUAL
OVERRIDE
BUTTON
292 mm
(11-1/2")
8mm x 25 mm
(5/16" x 1") SLOT
3/4" SPUD
K2 HANGERS
697 mm
(27-1/2")
212 mm
(8-3/8")
411 mm
(16-1/8")
420 mm
(16-1/2")
102 mm
C/L OF OUTLET
FINISHED (4")
FLOOR
Product names listed herein are trademarks of AS America Inc.
© AS America Inc. 2018
Adjustable Wrench
Blade Screwdriver
FINSHED WALL
SUPPLY DN 20 mm
(3/4" I.P.S.)
15
285 mm
(11-1/4")
446 mm
(17-1/2")
380 mm
(15")
121 mm
(4/3/4")
432mm (17")
MAXIMUM
610mm (24")
OPTIONAL
TO FINISHED
FLOOR
13mm
(1/2") GASKET
102mm
13mm
(4")
(1/2")
2" N.P.T.
FINISHED
INSIDE THREADS
WALL
DETAIL OF OUTLET CONNECTION
Pencil Hole Cutting Equipment
Levels
419 mm
(16-1/2")
50 mm
67 mm 8mm x 25 mm
(2")
(2-5/8") (5/16" x 1") SLOT
697 mm
(27-1/2")
212 mm
(8-3/8")
411 mm
(16-1/8")
420 mm
(16-1/2")
102 mm
FINISHED (4")
FLOOR
6517 Back Spud
FINSHED WALL
K2 HANGERS
285 mm
(11-1/4")
446 mm
(17-1/2")
380 mm
(15")
121 mm
(4/3/4")
432mm (17")
MAXIMUM
610mm (24")
OPTIONAL
TO FINISHED
FLOOR
C/L OF OUTLET
13mm
(1/2")
GASKET
102mm
13mm
(4")
(1/2")
2" N.P.T.
FINISHED
INSIDE THREADS
WALL
DETAIL OF OUTLET CONNECTION
7302379-100 11/18
55 mm
(2-1/8")