Kichler 82280 Manual Del Usuario página 4

ASSEMBLY INSTRUCTIONS
1. Lower decorative ring (F) over shade (G).
Note: The electrical cable will need to get pulled
through the individual parts as they are installed
on this and later steps.
2. Screw threaded tube (M) onto coupling (J).
Screw fixture loop (L) onto threaded tube (M).
3. Position threaded nipple (C) in mounting bracket
(B) so that, when mounted:
• The threaded nipple (C) will protrude a
minimum of ¼ inch beyond the raised center
portion of the bracket (B).
• The threaded nipple (C) height should be
positioned so that ½ the exterior threads of
the screw collar loop (I) will extend past the
canopy (A), when it is mounted.
Note: Canopy is only needed to
determine the position of the threaded nipple
and fixture loop. It will be installed later.
1
2
3
B
A A
4
L
M
J
1/4
Inch
C
I I
F
G