Functional Description - Milwaukee 2677-20 Manual Del Operador

unpredictable behavior resulting in fire, explosion or
risk of injury.
• Do not expose a battery pack or tool to fire or ex-
cessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
KNOCKOUT TOOL
• Use tool only as directed. Only trained personnel
should operate tool.
• Do not use in or near live electrical panels. Only work
on de-energized electrical panels. Disconnect all electri-
cal current before use to avoid the risk of electric shock.
• Keep hands away from knockout die and punch while
tool is in use. Fingers could be crushed or severed.
• To reduce the risk of injury, wear safety goggles or
glasses with side shields. Before use, inspect and
discard workpieces and accessories with cracks
or damage. Shards from weakened metal could cause
injury.
• Avoid contact with punched metal edges. Edges
may be sharp and could cause injury.
• Do not attempt to punch through more than one
layer of material at a time. Punching through multiple
layers could cause the material and accessories to
warp break, throwing shards that could cause injury.
• Use tool only with knockout dies and punches
rated for the peak output force of this tool. Other
uses may cause injury or damage to the tool, acces-
sories, and workpiece.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
• Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFICATIONS
Cat. No. ..................................................... 2677-20
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Peak Output Force .................................... 6.7 Tons
Material Capacities * ...............................................
4" Conduit Holes ..........................14 ga Mild Steel
2" Conduit Holes ..................14 ga Stainless Steel
*See chart on back of manual

FUNCTIONAL DESCRIPTION

1
7
11
12
SYMBOLOGY
Volts
Direct Current
UL Listing for Canada and U.S.
C US
WARNING
live electrical panels.
WARNING
Fingers could be crushed or severed.
Release button
Always wear eye protection
Read Operator's Manual
3
2
3
4
5
6
8
1. Release button
2. Handle
3. LED
9
4. Lock button
5. Trigger
10
6. Cylinder
7. Piston
(inside cylinder)
8. Coupler
9. Quick connect anvil
13
assembly
10. Quick connect
sleeve
11. Rapid Reset ball
14
pull
12. Rapid Reset draw
stud
13. Ball pull
14. Draw stud
15. Die
15
16. Punch
16
Risk of electric shock.
Do not use in or near
Keep hands away
from punch and die.