Custom Program - LG DLE5001W Manual De Propietario

CYCLE OPTION BUTTONS
To Install the Drying Rack
With the dryer door open, slide the rack into
1
the dryer drum.
2
Make sure it is seated evenly on the edge
of the inner door rim and resting flat on the
inside of the dryer.
NOTE: Be sure to remove the drying rack
after using the RACK DRY cycle.
32
MFL62512809_en_0122.indd 32
(cont.)
NOTE: You may only save one custom program
at a time. Pressing and holding the CUSTOM
PROGRAM button will overwrite any previously
saved custom program.
* To Save a Custom Program:
Turn on the dryer and turn the cycle selector
1
knob to select the desired cycle.
Use the cycle setting buttons to adjust the
2
settings for that cycle.
Press the cycle option button(s) for the option
3
you would like to add. A confirmation
message will be shown in the display.
Press and hold the CUSTOM PROGRAM
4
button for 3 seconds.
To Recall a Custom Program:
Turn on the dryer.
1
2 Press the CUSTOM PROGRAM button.
3 Press the START/PAUSE button to start
the cycle.

CUSTOm PROGRAm

If you have a special
combination of settings that
you use frequently, you can
save these settings as a
CUSTOM PROGRAM.
2010.1.22 12:15:14 PM