Lumme LU-2101 Manual De Instrucciones página 15

Chicken balls Chop chicken fillet. Dice onions finely and fry with butter till golden brown. Assemble a meat grinder according to user manual and set 3 mm disc.
Ingredients: Mince chicken fillet and fried onions with the meat grinder. Add salt, spices and mix thoroughly. Make 12-15 g meat balls of minced meat. You may
Chicken fillet – 600 g deep freeze the meat balls or cook them. You could serve meat balls as a main course if boil them for 15 minutes in salted water, or could add
Onion – 100 g them to soup or ragout.
Butter – 50 g
Salt, spices
CLEANING AND MAINTENANCE

Switch off the appliance and make sure that the motor has stopped completely.
 Unplug the appliance.

Disassemble by reversing the assembling steps (fig.12).

Press locking button and turn the whole grinder head in the direction of the arrow.
Remove the pusher and tray (fig. 13).

Clean all the attachments and parts right after use.

Do not immerse motor unit, plug and power cord in water or keep in running water.
Wipe the motor unit with a damp cloth.

Wash all the parts that have come in contact with meat in warm soapy water.

Do not use abrasives, chlorine containing substances or organic solvents.

The metal parts of the meat grinder are not to be washed in the dishwasher!

Do not wash all metal parts with hot water which temperature above 40℃. Because it will accelerate metal parts oxidation.

After washing please use dry cloth to wipe the metal parts.
 Wipe all the cutting parts (cutting knife, cutting plates) with vegetable oil.

If the meat grinder won't be used for a long time, please wipe all the metal parts by vegetable oil-wet dishcloth.
CAUTION: The blades are sharp and therefore dangerous. Handle with care.
STORAGE

Switch off and unplug the appliance; let it entirely cool.

Complete all requirements of Chapter CLEANING AND MAINTENANCE.

Keep the appliance in a dry cool place.
SPECIFICATION
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Production branch:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
Power supply Mincing speed
220 – 240 V, 50 Hz up to 1,5 kg/min
Maximum
Net / Gross weight
power
1800W 2,77 kg / 3,16 kg
15
Gift box dimension (L x W x H)
393 mm х 240 mm х 195 mm