cecotec CONGA 4090 Instrucciones De Uso página 37

ENGLISH
Warnings:
• Remove the Wet & dry tank from the robot before charging it.
• Make sure there are no obstacles in the room being cleaned to ensure the robot can get
to the charging base without problems.
Pause
While the robot is operating, press
it and press to resume cleaning.
Standby
The robot will automatically enter standby mode after 5 minutes of no operation. Press
the App, the remote control or on the robot to start it up again.
Warning:
• After 12 hours of no operation, the robot will turn automatically off.
• The robot will not enter standby mode during charging.
Suction power level
Press on the remote control to select the desired power level. Choose between Eco (low
power), Medium (medium power) and Turbo (maximum power).
Schedule
WARNING: the robot cannot be scheduled from more than one device at a time. Make sure to
schedule it either from the mobile phone App or from the remote control.
The robot is provided with a schedule function in order to provide a maximum-efficiency
cleaning. The time settings and the cleaning schedules must be carried out from the remote
control. Once the robot has been scheduled, it will automatically carry out the cleaning cycles
every scheduled day.
Note: make sure the robot is activated and that the light indicator is lighted before scheduling
any cleaning or setting time.
1. Current time
1. Long press the "time" button for 3 seconds. The first 2 digits, indicating the
hour, will start blinking.
36
on the App, the remote control or on the robot to pause
on