16 Operation; Before Use - LG WT7005C Serie El Manual Del Propietario

Ocultar thumbs Ver también para WT7005C Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

us_main.book.book Page 16 Tuesday, November 17, 2020 10:53 AM

16 OPERATION

OPERATION

Before Use

WARNING
• To reduce the risk of fire, electric shock, or injury
to persons, read the SAFETY INSTRUCTIONS
before operating this appliance.
Operation Overview
1
Sort laundry and load the washer.
• Sort laundry by fabric type, soil level, color
and load size, as needed. Open the lid and
load items into the washer.
• If using single-use detergent packs, or gel
or tablet detergents, place them in the tub
before loading the laundry.
2
Add cleaning products.
• Add the proper amount of HE (High-
Efficiency) detergent to the detergent
dispenser.
• If desired, add bleach or fabric softener to
the appropriate dispensers.
• Do not place liquid or powdered detergent
packs, or gel or tablet detergents in the
dispenser.
3
Turn on the washer.
• Press the Power button to turn on the
washer.
• The lights above the cycle buttons will
illuminate and a chime will sound.
4
Select a cycle.
• Turn the cycle selector knob or press the
cycle buttons repeatedly until the desired
cycle is selected.
• The preset wash temperature, spin speed,
soil level and option settings for the
selected cycle are shown.
• The Normal cycle must be selected in order
to change its default settings.
• Pressing the Start/Pause button without
selecting a cycle immediately starts the
Normal cycle with the default settings.
5
Adjust settings.
• Default settings for the selected cycle can
be changed, if desired, using the cycle
modifier and option buttons.
• Not all modifiers and options are available
on all cycles. A different chime sounds and
the LED does not light up if the selection is
not allowed.
6
Begin cycle.
• Press the Start/Pause button to begin the
cycle. The lid locks, and the washer agitates
briefly without water to measure the weight
of the load.
• If the Start/Pause button is not pressed
within a certain time, the washer shuts off
and all settings are lost.
NOTE
• You must press and hold the Power button
when turning off the appliance. This helps
prevent accidentally turning it off during a cycle.
7
If necessary, add additional items to the tub
while the Add Garment light is on.
• This light turns on at the beginning of the
wash cycle to indicate when it is safe to add
items to the tub.
• Press the Start/Pause button to pause the
cycle and add items to the tub. Press the
Start/Pause button to resume the cycle.
• Adding items after the Add Garment light
turns off may result in poor wash
performance.
8
End of cycle.
• When the cycle is finished, a melody
sounds. Immediately remove the clothing
from the washer to reduce wrinkling.
• If the washer includes lint filters, remember
to check lint filters after every 2 to 3 loads.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Wt7005cw

Tabla de contenido