urmet domus 1092 Manual De Usuario página 29

AREA SEL – AREA SELECTION
By selecting this option, 8 privacy zones are displayed. It is possible to define the number of areas to be
displayed on the screen and the size of each single area.
Press the button on the minicamera front to perform all desired changes.
To quit the menu, keep the button pressed for some seconds.
AREA COLOR – COLOUR OF THE AREA
Select this item to choose the colour of the zone to be masked.
Move the button on the minicamera to the right to choose among the following colours: white, yellow, cyan,
magenta, red, blue and black.
AREA TRANS – AREA TRANSPARENCE
Select this option to define the transparence level of the masked area.
Move the button on the minicamera to the left or right to increase or reduce the transparence level.
CAM ID – MINICAMERA NAME
This function allows to give a name to the "minicamera" and display it in the desired positions.
Select ON and press the button to gain access to the following submenu where to give a name to the
minicamera.
CAM – ID SETUP
ABCDEFGHIJKLMNO
PQRSTUVWXYZabcd
efghijklmnopqrs
tuvwxyz01234567
89 ()<>-/#*!?,.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Put the button in the different positions to move on the desired character.
Press the central button to confirm it.
Select CLR to delete the selected characters.
Select POS and press the button to automatically quit the submenu and display the previously selected
characters.
Use the arrows
Put the button on the minicamera in the different positions to move the characters in the desired position.
Once the position has been defined, press again the button to go back to the previous menu.
To quit the menu select RET.
POS CLR RET
/ to move and separate the selected characters.