Motion Detector - urmet domus 1092 Manual De Usuario

DIAGNOSTICS
PROBLEMS
No image displayed on the
screen
Displayed images are not
sharp enough.
Captured images are too
clear or overexposed.
Colours of captured image
are not real.
DNR / D&N EXT functions
can not be activated.
SENS-UP function can not
be activated.
Camera switches repeatedly
between DAY mode (color)
and NIGHT mode
(black&white).

MOTION DETECTOR

function can not be activated.
If the problem can not be solved following the instructions in the table above, contact an authorized
technical assistance.
POSSIBLE CAUSES
The mains voltage is not
compatible with the minicamera.
The minicamera power supply
cable has not been connected.
The minicamera video cable has
not been connected..
The minicamera external lens is
dirty.
Focus settings are not correctly
adjusted.
Monitor contrast and brightness
settings are not correctly
adjusted.
Brightness adjustment is not
optimal.
White balancing adjustment is
incorrect.
GAIN function is not active.
GAIN function is not active.
The SHUTTER is not adjusted at
1/50 (default).
Especially in small environments,
presence of infrared reflecting
objects can cause the sudden
switch of the IR CUT filter.
The function is not active or
needed adjustments have not
been correctly performed.
SOLUTIONS
Check
Make the connections
Check
Adjust focus
Modify
Change brightness adjustment.
Check WHITE BAL menu options.
Modify .
Check
Modify
Check
Modify
Reduce the power of the IR illumination
or move its pointing. Besides, it is
possible to ad just the BRIGHTNESS.
If BLC Area option is used, don't point
the IR illumination inside the Area.
Check on Main Menu Setup – Special –
Motion Det and change the setting by
selecting ON to gain access to the
respective submenu; perform
adjustments.