Dtv Closed Caption - Sylvania LC200SL9 A Manual Del Usuario

O
PTIONAL SETTING
3
Press [SETUP] to exit.
Note:
• To show the closed caption on your TV screen, broadcast
signal must contain the closed caption data.
• Not all TV programs and commercials have the closed
caption or all types of the closed caption.
• Captions and texts may not match the TV voice exactly.
• Changing channels may delay the closed caption for a few
seconds.
• Adjusting or muting the volume may delay the closed
caption for a few seconds.
• Abbreviations, symbols and other grammatical shortcuts
may be used in order to keep pace with the on-screen
action. This is not a problem with the unit.
• The caption or text characters will not be displayed while
the main menu or functions display is shown.
• If a black box appears on the TV screen, this means that the
closed caption is set to TEXT mode. To clear the box, select
"CAPTION 1", "CAPTION 2", "CAPTION 3, "CAPTION 4" or
"OFF".
• If the unit receives poor quality television signals, the
captions may contain errors, or there might be no captions
at all. Some possible causes of poor quality signals are:
- Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
• The unit retains the closed caption setting if the power fails.
20
EN

DTV Closed Caption

DTV
In addition to the basic closed caption described on page 19, DTV has its
own closed caption called DTVCC. Use this menu to change the settings for
DTVCC.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K /L] to select "DTVCC", then press
[ENTER].
or
3
Use [Cursor K /L] to select "CAPTION SERVICE", then
press [ENTER] repeatedly to change the setting.
or
OFF
CAPTION SERVICE
SERVICE1~6
4
Press [SETUP] to exit.
Note:
• "CAPTION SERVICE" that you can switch differs depending
on the broadcast description.
e.g.) digital TV mode
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
COLOR TEMP. [NORMAL]
DTVCC
- DTVCC -
CAPTION SERVICE [SERVICE1/6]
USER SETTING [ON]
CAPTION SIZE [MIDDLE]
FONT STYLE [STYLE1/8]
CHARACTER EDGE [NONE]
FORE OPACITY [SOLID]
FORE COLOR [WHITE]
BACK OPACITY [SOLID]
BACK COLOR [BLACK]
Select if you do not want
DTVCC. This is the default.
Select one of these before
changing any other item in
"CAPTION" menu. Choose
"SERVICE1/6" under normal
circumstances.