Alfa Pro QUICK Manual De Uso página 15

GENERAL WARNINGS
PLEASE READ THE FOLLOWING INFORMATION FOR PROPER INSTALLATION AND OPTIMUM PERFORMANCE
OF THE OVEN.
- The identification plate, with technical data, serial number and brand name is visibly applied to the device. The
plate must not be removed.
- Before putting the unit into operation, it is mandatory to remove all protective laser films present.
- Never use steel sponges or sharp scrapers, its will damage the surfaces. Use ordinary non-abrasive products,
use, if necessary, wood or plastic tools. Rinse thoroughly and dry with a soft cloth or microfiber cloth.
- Do not use dishes or containers made of plastic material. The high temperatures inside the oven could melt the
plastic, damaging the appliance.
- Do not use sealed tins or containers in the appliance. During cooking overpressure may occur inside the
containers creating danger of bursting.
- Do not leave the appliance unattended during cooking that can free fats or oils. Fats and oils may cause fire.
- Do not block the openings and slots provided for ventilation and heat dissipation.
- Use tools and utensils that are resistant to high temperatures.
- Position the oven on a flat surface.
- Due to the temperature, the colour of the surfaces may vary in time.
- Do not paint or apply objects to the oven
- Do not use charcoal, firewood, briquettes or lava rock or fuel other than LPG gas.
EN
13