Using The Chopping Blade - Ninja BL492 Serie Manual Del Usuario

Chopping blade
Lame à hacher
Cuchilla para picar
G
USE
UTILISATION
USO
CAUTION: CHOPPING BLADE IS
NOT LOCKED IN PLACE. IF USING
THE POUR SPOUT, ENSURE THE
LID IS FULLY LOCKED ONTO THE
BLEND AND PREP BOWL.
USING THE

USING THE CHOPPING BLADE:

CHOPPING BLADE CAUTION: USE CAUTION WHEN
HANDLING THE CHOPPING BLADE THE
& DOUGH BLADE
BLADES ARE VERY SHARP.
1 Holding the Chopping Blade by the shaft, place
it onto the drive gear (G) inside the Bowl.
Ensure the attachment fits around the gear
shaft and that it is standing straight.
2
Add the ingredients and secure the Bowl lid
onto the Bowl.
3
Plug the power cord into the electrical outlet.
Once the Bowl is engaged, the programs
available for that attachment will illuminate.
Select the program desired based on your recipe.
The Auto-iQ
automatically at the end of the program.
4
When you have reached your desired consistency,
stop the appliance by pressing the START/STOP
button or selecting the program twice. Wait for
the chopping blade to stop turning.
1 2
H
DÉMONTAGE
EXTRACCIÓN
CAUTION: THE CHOPPING BLADE
IS NOT LOCKED IN PLACE.
IF POURING WITH THE LID
REMOVED, ALWAYS REMOVE
THE CHOPPING BLADE FIRST.
REMOVAL:
5
6
7
program will stop the appliance
™
w w w . n i n j a k i t c h e n . c o m
®
I J
REMOVAL
To remove the lid, press the release button on the
lid and pull the lid handle up to a 90° angle (H).
Turn the Bowl counter-clockwise and lift it to
remove it from the motor base (I).
To release the motor base from the counter or
tabletop, place your hands underneath both sides
of the motor base and gently pull the unit up and
toward you (J).
Dough blade
Lame à pétrir
Cuchilla para amasar
K
USE
UTILISATION
USO
IMPORTANT: DO NOT
OVERFILL. TO AVOID SPILLING,
DO NOT ADD INGREDIENTS
PAST THE "MAX LIQUID" LINE.
USING THE DOUGH BLADE:
IMPORTANT:
This makes 1 Lb. of dough at a time.
Do not overfill or exceed. Motor may overheat.
1 Holding the Dough Blade by the shaft, place it
onto the gear shaft inside the Bowl (K). Ensure
that the attachment fits around the gear shaft
and that it is standing straight.
2 Add the ingredients and secure the Bowl lid onto
the Bowl.
3 Plug the power cord into the electrical outlet.
Press the START/STOP button to turn on the
unit. Once the Bowl is engaged, the programs
available for that attachment will illuminate.
Select LOW on the control panel and process until
ingredients come together to form a mass.
4 Once finished making the dough, stop the
appliance by pressing the START/STOP button
again or selecting the program twice. Wait for
the blade to stop turning.