Yakima SkyBox Guia De Inicio Rapido página 3

Open lid to gain access to levers.
Slide clamps along tracks (inside box) to
engage crossbars.
Adjust box position, checking for
good alignment.
Always position box to avoid
interference with rear hatch or sunroof.
On some vehicles,
hatch interference is
unavoidable. Use caution
when opening your hatch.
1034839B-3/18
Close levers to
engage clamps.
open
closed
• Check clamp opening for crossbar clearance.
• Loosen clamp thumb wheel if necessary.
TIGHTEN ALL
THUMB WHEELS.
Tighten clamp
thumb wheels
until the levers
close with firm
resistance.