Kobalt KST 2224B-03 Manual Del Usuario página 67

Ocultar thumbs Ver también para KST 2224B-03:
Tabla de contenido

Publicidad

SAFETY INFORMATION
An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result in a
risk of fire and electric shock. If an extension cord must be used,
make sure that:
The pins on the plug of extension cord are the same number,
size and shape as those of the plug on charger.
The cord is properly wired and in good electrical condition.
The size is large enough for A/C ampere rating of charger as
specified below:
Cord Length (Feet)
Cord Size (AWG)
NOTE: AWG = American Wire Gauge
Do not operate the charger with a damaged cord or plug, which
could cause shorting and electric shock. If damaged, have the
charger repaired or replaced by a qualified service technician.
Do not operate the charger if it has received a sharp blow, been
dropped, or has otherwise been damaged in any way. Take it to
a qualified service technician for an electrical check to determine
if the charger is in good working order.
Do not disassemble the charger. Take it to a qualified service
technician when service or repair is required. Incorrect
reassembly may result in a risk of electric shock or fire.
Unplug the charger from the electrical outlet before attempting
any maintenance or cleaning to reduce the risk of electric shock.
Disconnect charger from the power supply when not in use. This
will reduce the risk of electric shock or damage to the charger if
metal items should fall into the opening. It will also help prevent
damage to the charger during a power surge.
25 ft.
50 ft.
16
16
6
100 ft.
16

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido