Tabla De Contenido - Stiga CP1 430 Li D48 Manual De Instrucciones

WARNING!: READ THIS MANUAL CAREFULLY BEFORE USING THE MA-
EN
CHINE. Keep safe for future use.
INDEX
1. GENERAL INFORMATION .......................................... 1
2. SAFETY REGULATIONS ............................................. 1
3. GETTING TO KNOW THE MACHINE .......................... 3
4. ASSEMBLY ................................................................... 4
5. CONTROLS .................................................................. 4
6. USING THE MACHINE ................................................. 4
7. MAINTENANCE............................................................ 6
8. STORAGE..................................................................... 6
9. HANDLING AND TRANSPORTATION ........................ 7
10. MAINTENANCE TABLE ............................................... 7
11. TROUBLESHOOTING ................................................. 7
12. ACCESSORIES ON REQUEST ................................... 8
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
Some paragraphs in the manual that contain particularly im-
portant information regarding safety and operation and are
emphasised in a different manner, according to this criterion:
NOTE OR IMPORTANT
formation on what has already been said, and aim to prevent
damage to the machine.
This symbol highlights danger. Failure to observe the
warning can lead to possible personal and/or third party injury
and/or damage.
The paragraphs highlighted in a square with grey spots
indicate the optional characteristics that are not availa-
ble on all models documented in this manual. Check if
the characteristics are available on this model.
Whenever reference is made to a position on the machine
"front", "back", "left" or "right" hand side, this refers to the oper-
ator's working position.
1.2 REFERENCES
1.2.1 Figures
The figures in these instructions for use are numbered 1,
2, 3, etc.
The components indicated in the figures are identified with
letters A, B, C, and so on.
Reference to component C in figure 2 is indicated with the
wording: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are provided as a guide only. The actual pieces
can differ from those illustrated in this document.
1.2.2 Titles
The manual is divided into chapters and paragraphs. The title of
paragraph '2.1 Training" is a sub-title of "2. Safety regulations".
References to titles or paragraphs are marked with the abbreviation
chap. or par. and the relevant number. Example: "chap. 2" or "par. 2.1"
2. SAFETY REGULATIONS
2.1 TRAINING
Become acquainted with the controls and the
proper use of the machine. Learn how to stop the motor
quickly. Failure to follow the warnings and instructions
may result in fire and/or serious injury.
these give details or further in-
• Never allow children or persons unfamiliar with these
instructions to use the machine. Local laws may establish
a minimum age for users.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowl-
edge if they have been given supervision or instructions
concerning use of the appliance in a safe way and under-
stand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
• Never use the machine if the user is tired or unwell, or has
taken medicine, drugs, alcohol or any substances which
may slow their reflexes and compromise their judgement.
• Do not allow children or other passengers to ride on the
machine.
• Bear in mind that the operator or user is responsible for
accidents or unexpected events that may occur to other
people or their property. It is the user's responsibility to
assess the potential risk of the area where work is to be
carried out and to take all the necessary precautions to
ensure his own safety and that of others, particularly on
slopes or rough, slippery and unstable ground.
• If the machine is sold or lent to others, make sure that
the operator reads the user instructions contained in this
manual.
2.2 PRELIMINARY PROCEDURES
Personal Protective Equipment (PPE)
• Always wear suitable work attire, hard-wearing safety
footwear with non-slip soles and long trousers. Do not
operate the machine barefoot or wearing open sandals.
Wear hearing protection devices.
• Use of hearing protections can reduce the ability to hear
any warnings (shouting or alarms). Be careful of what
occurs around you in the work area.
• Wear protective gloves whenever your hands are at risk.
• Never wear scarves, shirts, necklaces, bracelets, loose
flowing clothing, laces or ties or any hanging or hanging
accessories that could be caught in the machine or in any
objects or materials in the work area.
• Tie your hair back if it is long.
Work area/Machine
• Thoroughly inspect the entire work area and remove
anything that could be thrown by the machine or damage
the cutting means/rotating units (stones, branches, iron
wires, bones, etc.).
2.3 DURING OPERATION
Work Area
• Do not use the machine in environments at risk of explo-
sion, in the presence of flammable liquids, gas or powder.
Power tools create sparks which may ignite the dust or
fumes.
• Work only in daylight or with good artificial light in good
visibility conditions.
• Keep persons, children and animals away from the work-
ing area. Children must be supervised by another adult.
• Avoid working with wet grass, in the rain and when there is
a risk of a thunderstorm, especially lightening.
EN - 1