Philips Lumea Precision Plus SC2008 Manual De Instrucciones página 30

Tabla de contenido

Publicidad

ENGLISH
30
Problem
Hair starts to grow again
in some spots on the
treated areas.
Possible cause
Solution
You did not make
For proper hair-removal results, you have to make
enough overlaps
overlaps when you use the appliance. See chapter
when you used
'Using the appliance', section 'Subsequent use', step 9.
the appliance.
You do not use
To remove all hairs successfully and to prevent the hair
the appliance
root from becoming active again, the treatments have
as often as
to be repeated once every two weeks for the first two
recommended.
months. To ensure that your skin stays smooth, we advise
you to repeat the treatment every four to six weeks.
The time between treatments may vary based on your
individual hair regrowth and also across different body
areas. If too many hairs grow back between treatments,
simply shorten the treatment interval again, but do not
treat any area more often than once every two weeks.
When you use the appliance more frequently than
recommended, you do not increase the effectiveness but
you do increase the risk of skin reactions.
The appliance is
Do not use the appliance if your body hair is light
not suitable for
blond, red, grey or white. Do not use the appliance
your hair or skin
either if you have very dark skin.
colour.
You did not make
For proper hair-removal results, you have to make
enough overlaps
overlaps when you use the appliance. See chapter
when you used
'Using the appliance', section 'Subsequent use', step 9.
the appliance.
Hair starts to grow
This is normal. It is part of the natural cycle of hair
again as part of
growth that hair starts growing again. The hairs that
the natural cycle of
come back, however, tend to be softer and thinner.
hair growth.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Lumea precision plus sc2006Sc2008Sc2006

Tabla de contenido