Chauvet DJ COLORband T3 USB Guía De Referencia Rápida página 2

COLORband T3 USB QRG
About This
Guide
Disclaimer
Safety Notes
Contact
What Is
Included
To Begin
The COLORband T3 USB Quick Reference Guide (QRG) has basic product
information such as mounting, menu options, and DMX values. Download the User
Manual from www.chauvetlighting.com
The information and specifications here are subject to change without notice. Chauvet
reserves to right to revise or reissue this QRG.
These Safety Notes include important information about product mounting, use, and
maintenance.
·
ONLY connect this product to a grounded and protected circuit.
·
DISCONNECT from power before cleaning or replacing the fuse.
·
DO NOT look at the light source when the product is on.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect this product from power by pulling on the cord.
·
When mounting this product overhead, ALWAYS use a safety cable.
·
DO NOT allow flammable materials close to the product when it is operating.
·
DO NOT touch the product's housing when it is on because it will be hot.
·
DO NOT operate this product if the housing, lenses, or cables appear damaged.
·
The voltage of the outlet to which you are connecting this product must be within
the range stated on the decal or rear panel of the product.
·
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose this product to rain or moisture.
·
Always mount this product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the unit's housing are blocked.
·
Never connect this product to a dimmer or rheostat.
·
Replace the fuse with the same type and rating.
·
ONLY carry this product by the hanging/mounting brackets.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate this
product at higher temperatures.
·
In the event of a serious operating problem, stop using immediately.
·
DO NOT open this product. It contains no user-serviceable parts.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging
it.
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your
distributor to request support or return a product. Visit
contact information.
·
COLORband T3 USB
·
Hanging Bracket with Mounting
Hardware
Unpack your COLORband T3 USB and make sure you have received all parts in
good condition. If the box or contents appear damaged, notify the carrier
immediately, not Chauvet.
for more details.
·
Power Cord
·
Warranty Card
·
Quick Reference Guide
2
www.chauvetlighting.com
EN
for