Menu 4. Select Language; Menu 5. Choose Probe; Menu 6. Stand-By Mode; Menu 7. Sound Mode - Bio Bronpi NEVA Instrucciones De Instalación, Uso Y Mantenimiento

After this, we need to select the activation or deactivation of each programme depending on the day of the week.
For example (see drawing D66):
Programme 1: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF), Friday (ON), Saturday (ON), and
Sunday (OFF.)
Programme 2: Monday (OFF), Tuesday (OFF), Wednesday (ON), Thursday (OFF), Friday (OFF), Saturday (ON),
and Sunday (ON.)
Programme 3: Monday (OFF), Tuesday (ON), Wednesday (ON), Thursday (ON), Friday (ON), Saturday (ON), and
Sunday (OFF.)
Programme 4: Monday (ON), Tuesday (ON), Wednesday (OFF), Thursday (OFF), Friday (OFF), Saturday (OFF),
and Sunday (ON.)
Thanks to this type of setting we can combine 4 different times throughout the days of the week, but always
keeping in mind not to overlay the times.
Sub-menu 03-04- Weekend Programme
In the same way as in the daily programme, this setting up has two independent times to
start and two to stop, with the exception that it only applies to Saturday and Sunday. To
access to this setting we need to start from the following screen (see drawing D67):
We need to confirm the access to this programme by pressing button no.7 and it should
show up the following screen (see drawing D68):
We modify the value "OFF" and select "ON": Finally, we introduce the times to start and
stop to complete the desired setting up.
As in the daily programme, if we need to set up only one time to start and stop, the
options START 2 and STOP 2 should indicate "OFF."
It is also possible to schedule one automatic start hour and manual stop hour (or vice
versa).
Example: START 1: 08:00 hours and STOP 1: "off" or
START 1: "off" and STOP 1: 22:00 hours.
9.4.5

MENU 4. SELECT LANGUAGE

It allows selecting the languages among those available. To access this menu you have
to confirm with button nº 7 and then, choose the selected language among available:
Spanish, Portuguese, Italian, French, English and Catalan with buttons nº 1 and 2 (see
drawing D69).
9.4.6

MENU 5. CHOOSE PROBE

It allows us to select the probe to control the operation of the stove or insert (the one
in the equipment or the one on the remote control). It is advisable to select the option
"Internal probe (stove or insert probe)" so that the stove works depending on the
temperature where it is installed and not the temperature of the room where the remote
control is. See drawing D70.
9.4.7

MENU 6. STAND-BY MODE

The stove or insert with the "stand-by mode" activated (see drawing D71) will turn off
when the temperature reaches the temperature set plus a differential (2º C). When the
ambient temperature falls to the set temperature minus a differential (2ºC) the stove
automatically restarts an ignition cycle. It means that if you choose a set temperature
of 22ºC the stove wills turn-off when the room temperature is 24º C and it will restart
automatically when the ambient temperature falls to 20ºC.
In case of the "Stand-by Mode" is deactivated (by default) the stove will work in
"modulation work" when it reaches the set temperature and that allows the temperature
set could be higher.
9.4.8

MENU 7. SOUND MODE

By activating this modality, the stove or insert will emit a sound when the system detects a fault and goes into the alarm state. To access to
this menu you have to confirm with button nº 7 and then, choose "on" with buttons nº 1 and 2 (see drawing D72).
9.4.9

MENU 8. INITIAL LOAD

In case of the stove have no more fuel during the operation, to avoid an anomaly in the next ignition, it is possible
to do a fuel pre-load for maximum time of 90 seconds to load the screw-type conveyor when the stove is switched
off and cold. To start the load press button nº 2 and to stop it press button nº 3. (See drawing D73).
It is very important that the burner is totally clean when you start the stove or insert. So, when the initial
load is finished, you must check the burner is clean of fuel to do correctly the ignition of the stove.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
M-3-4
PROGRAMME
WEEKEND
MENU
Menu 04
SPANISH
MENU
ON
Menu 06
MODE
STAND-BY
MENU
40
on
M-3-3-04
PROG - 1
MENU
D66
off
M-3-4-01
PROGRAMME
WEEKEND
MENU
D67 D68
Menu 05
SELECT
SENSOR
MENU
D69 D70
ON
Menu 07
MODE
SOUND
MENU
D71 D72
76"
22º C
LOAD
INITIAL
MENU
D73
RADIOFREQUENCY SERIES