Bio Bronpi NEVA Instrucciones De Instalación, Uso Y Mantenimiento página 40

Right after, we need to choose the set up that we want to introduce: daily, weekly or weekend. To do so from the previous screen, we need to
press repeatedly buttons nº5 and nº6 until we reach the desired option.
Submenu 02.02. Daily Programme
To choose the daily program we need to go to the following screen (see drawing D56):
By pressing just once button nº 7 we are able to access to the daily programming
submenu. By default, it will show the following screen (see drawing D57).
We need to change the option "OFF" with "ON" by pressing the buttons nº1 and nº2 so
as to confirm to the machine.
Now we need to choose the hours that we would like the stove to be switched ON. To
do this, there are 2 hours available to start and 2 to stop the stove: START 1 and STOP
1; START 2 and STOP 2.
For example:
Start at 09:00 hours / stop at 14:30 hours.
Start at 20:30 hours / stop at 23:00 hours.
From the previous screen, we press button nº 7 and it will show up (see drawing D58):
By pressing nº1 and nº2 buttons we modify the value "OFF" and we set the time of the
first start (see drawing D59):
off
M-3-2-03
STOP 1
DAY
MENU
D60
Example: START 1: 08:00 hours and STOP 1: "off"
or
START 1: "off" and STOP 1: 22:00 hours.
Sub-menu 03-03- Weekly programme
NOTE: Please, make the set up carefully in order to avoid hour' superposition and/
or inactivate the same day in different programmes.
If we intend to make a weekly set up we need to take into account that, in this occasion,
we have 4 different hours to start and stop. So we need to assign every day of the
week the activation or not, as appropriate.
In order to activate them we need to start from the following screen (see drawing D62):
By pressing just once button nº 7 we gain access to the weekly programming submenu.
By default, it will show the following screen (see drawing D63).
We need to change option "OFF" with "ON" by pressing buttons no.1 and no.2. This
way we are confirming that the weekly set up has been selected:
Now, we only need to choose the time. we have 4 different times available to start and
stop (see drawings D64 and D65):
- PROGRAMME 1: START 1 and STOP 1
- PROGRAMME 2: START 2 and STOP 2
- PROGRAMME 3: START 3 and STOP 3
- PROGRAMME 4: START 4 and STOP 4
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
14:30
In this same way we can proceed
M-3-2-03
to set the first time to stop (see
STOP 1
drawing D60 and D61):
DAY
In case that you want to set up
just one time to start and stop, the options START 2 and STOP 2 should be "OFF".
If you want to set another on and off schedule, introduce the values of the second
schedule in the same way that is explained previously. This way we will have set the
MENU
diary schedule with two starts hours and two stops hours.
D61
It is also possible to schedule one automatic start hour and manual stop hour (or vice
versa).
M-3-2
PROGRAMME
DAY
MENU
off
M-3-2-02
START 1
DAY
MENU
M-3-3
PROGRAMME
WEEKLY
MENU
12:00
M-3-3-02
START
PROG - 1
MENU
39
OFF
M-3-2-01
PROGRAMME
DAILY
MENU
D56 D57
09:00
M-3-2-02
START 1
DAY
MENU
D58 D59
off
M-3-3-01
PROGRAMME
WEEKLY
MENU
D62 D63
18:15
M-3-3-02
STOP
PROG - 1
MENU
D64 D65
RADIOFREQUENCY SERIES