Selecting A Scene Mode; Locking Af During Underwater Shooting - Olympus PT-034 Manual De Instrucciones

Selecting a scene mode

Turn the Case's mode dial
camera mode to the [SCN] mode. When
the selection screen is displayed, press
the up/down cross-cursor button
select Underwater Wide 1, Underwater
Wide 2 or Underwater Macro, and then
press the OK button
selection. If you want to change mode
during operation, press the Case's
MENU button, then press the down
cross-cursor button to select the [SCN]
mode, and press the OK button. Press
the cross-cursor button so that the LCD
shows the underwater mode you have
just selected, and then press the OK
button to enter the selection.

Locking AF during underwater shooting

When Underwater Wide-Angle 1 or
Underwater Macro is selected. the
cross-cursor Down button on the
case functions as the AF LOCK
button. Pressing the button once
activates the AF lock mode. With
focus locked, you can concentrate
on operating the shutter whenever a
perfect picture opportunity arises.
Note: • To cancel the AF lock status, press the down cross-cursor
button (AF LOCK) again.
to set the
to
to enter the
Functions as the AF LOCK button
in the Underwater Wide-Angle 1 and
Underwater Macro modes.
E-26
Set to
"SCENE.".
Press the
OK button.
Select the
scene.