Connecting Baby Unit And Parent Unit; Alerts, Warnings And Indicators; Activation Of Features; Volume Adjustment - TIGEX Easy Protect Plus Instrucciones De Uso

This function is a safety programming which ensures
that baby unit will start automatically again after a
power outage. However, if you turn the baby unit off
manually by pressing the power ON/OFF button 18 the
unit will stay off during a power outage.

7.3 Connecting baby unit and parent unit

Once both units are supplied with electricity and are turned
on, they start connecting automatically. During the pairing
process the red of the five LED indicators 2 on the parent
unit 1 and the link indicator 17 on the baby unit 15 light up
This baby monitor has several ways to warn or alert you.
If you hear an alert pay close attention to the parent unit
and its display. Usually a sound indication is combined with
a special icon shown on the display.
Sound alert
Alarm every 30 s
Alarm every 60 s
Above the display 3 on the parent unit 1 are 5 LEDs 2 (4
green, 1 red). These LEDs have multiple purposes.
Activated function
No function is activated
(frequently illuminated LEDs)
Adjusting volume
(steady illuminated LEDs)
Adjusting VOX sensitivity
(flashing LEDs)
Eco-Mode / Lullabies
(no illuminated LEDs)
Only the red LED lights up

9.1 Volume adjustment

To adjust the volume of the parent unit you can use the
volume adjustment buttons 5. All together there are 5 levels

8. Alerts, warnings and indicators

Indicator/Icon
Link indicators 2 and 17 are
red
Link icon 22 is flashing
LED indicator 7 is flashing
red
Battery icon 24 is flashing
Nursery temperature shows
LO, HI or is flashing
Indicating the noise level in the nursery. The more LEDs are lit, the louder are the
noises.
The more LEDs are lit, the higher the volume level on the parent unit.
The more flashing LEDs the higher is the VOX Level and the more the microfon on
the baby unit is reacting to small noises. Level 5 will continuesly transmitt all noises
without activating the Eco-Mode
Indication that maybe the Eco-Mode is activated and your baby is sleeping.
The LEDs are also deactivated while the Lullabys are playing.
Lost link/no connection between parent unit and baby unit or indication for low
battery status.

9. Activation of features

red. When the link is established both indicators will turn
green.
Always ensure that the parent unit remains within the range
for the pairing process.
In the event that the connection between the parent unit
and the baby unit breaks down, the devices will
automatically attempt to establish a new one. If a new
connection is not established within 30 seconds, the parent
unit 1 will emit a regular beep and the link indicator 7 will
light up red. You may need to move the parent unit to a
different location before a new connection can be
established.
Note: blinking Icons and red LEDs need your attention and
reaction immediately.
Meaning
Parent unit is either out of
range or you lost the link to
the baby unit for another
reason
Battery is low
The temperature is outside
the correct range
Meaning
of volume and the option to mute the parent unit (see
"Mute Setting" on page 57).
56
What to do
Move the parent unit to a different
location so a new connection can be
established
Connect the mains adapter
Action is required (see
"9.7 Temperature tracking" on
page 58)