Publicidad
E8: The Down Position Has No Signal
1.
It is possible to receive an E8 error message which means that the down position has no signal.
• Check the connection of the synchronizer. Make sure it it is properly plugged into the back of the motor.
• Check the synchronizer. Make sure it is secure to handwheel on sewing head.
• Check the wiring. Make sure it is securely connected and there is no damage to the wire harness.
2.
If the synchronizer is securely connected and the E8 error message continues to appear the synchronizer is likely
faulty.
• Replace the synchronizer and the E8 error message should no longer display.
E9: The Up Position Has No Signal
1.
It is possible to receive an E9 error message which means that the up position has no signal.
• Check the connection of the synchronizer. Make sure it it is properly plugged into the back of the motor.
• Check the synchronizer. Make sure it is secure to handwheel on sewing head.
• Check the wiring. Make sure it is securely connected and there is no damage to the wire harness.
2.
If the synchronizer is securely connected and the E9 error message continues to appear the synchronizer is likely
faulty.
• Replace the synchronizer and the E9 error message should no longer display.
www.endurosaves.com
11 - ENGLISH
Publicidad
