Luminance Brands Kathy Ireland Home LK52 El Manual Del Propietario página 11

4. Installation on Luminance Brands Fans Having
Two-Piece Die-Cast Switch Housing (continued)
4.4
Thread the Light Fixture Assembly White and Black
Wires through the Switch Housing Cover, Lockwasher,
and Hex Nut, secure by using a wrench (Figure 15) .
4.5
Connect the Switch Housing White Wire to the
Light Fixture Assembly White Wire using one of the
previously removed Wire Connectors (Figure 16) .
Connect the Switch Housing Blue Wire to the Light
Fixture Assembly Black Wire using one of the
previously removed Wire Connectors (Figure 16) .
WARNING
!
To avoid possible fire or electrical shock, make
certain no bare wire strands are exposed outside wire
connectors.
LIGHT FIXTURE ASSEMBLY BLACK & WHITE WIRES
HEX NUT
LOCKWASHER
SWITCH
HOUSING
COVER
LIGHT FIXTURE
ASSEMBLY
Figure 15
SWITCH
HOUSING
SWITCH
HOUSING
BLUE WIRE
LIGHT FIXTURE
ASSEMBLY BLACK
WIRE
LIGHT FIXTURE
ASSEMBLY
Figure 16
11
SWITCH
HOUSING
WHITE WIRE
WIRE
CONNECTORS (2)
LIGHT FIXTURE
ASSEMBLY
WHITE WIRE
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: LK52-1