Luminance Brands Kathy Ireland Home LK52 El Manual Del Propietario página 9

3. Installation on Luminance Brands Fans Having a
Modular Switch Housing with Center Screw
3.12
Route the Light Fixture Assembly Chain through the
Center Hole of the Bowl Cap (Figure 11) .
Install and tighten the Bowl Cap and the Finial Nut onto
the Light Fixture Assembly Threaded Stud (Figure 11) .
NOTE: It is advisable to periodically check the
tightness of the finial nut.
3.13
Connect the Pendant (supplied with light fixture) to
the Light Fixture Assembly Control Chain by sliding
the Pendant (small hole first) up onto the Light Fixture
Assembly Control Chain (Figure 12) .
Attach the Coupling (supplied with light fixture) to
the end of the Light Fixture Assembly Control Chain
and allow the Pendant to fall down over the Coupling
(Figure 12) .
Connect the Pendant (supplied with fan) to the Fan
Speed Control Chain by sliding the Pendant (small hole
first) up onto the Fan Speed Control Chain (Figure 12) .
Attach the Coupling (supplied with fan) to the end of the
Fan Speed Control Chain and allow the Pendant to fall
down over the Coupling (Figure 12) .
GLASS
BOWL
THREADED STUD
BOWL CAP
FINIAL NUT
LED LIGHT FIXTURE
ASSEMBLY CHAIN
Figure 11
GLASS
BOWL
LED LIGHT FIXTURE
ASSEMBLY CHAIN
PENDANT
(supplied with light fixture)
COUPLING
(supplied with light fixture)
Figure 12
9
(continued)
FAN SPEED
CONTROL
CHAIN
FAN SPEED
CONTROL
CHAIN
PENDANT
(supplied
with fan)
COUPLING
(supplied
with fan)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: LK52-1