Luminance Brands Kathy Ireland Home LK52 El Manual Del Propietario página 12

4. Installation on Luminance Brands Fans Having
Two-Piece Die-Cast Switch Housing (continued)
4.6
Carefully tuck all Wires and Connectors into the Switch
Housing (Figure 17) .
Position the Switch Housing Cover/Light Fixture
Assembly onto the Switch Housing and reinstall the
Two Screws (previously removed in Step 4 .2) and
tighten Screws securely (Figure 17) .
!
To avoid possible fire or electric shock, be careful not
to pinch wires between switch housing and the cover
plate.
4.7
The Light Fixture Assembly Light Sockets are equipped
to accept Three 6 .5-Watt Medium Base A15 LED Bulbs
(supplied) (Figure 18) .
To Install the Three 6 .5-Watt Medium Base A15 LED
Bulbs into the Sockets, twist the Bulbs Clockwise to
secure (Figure 18) .
WARNING
SWITCH
HOUSING
SWITCH
HOUSING
COVER
REINSTALL
SCREWS (2)
Figure 17
LIGHT
SOCKETS
Figure 18
12
LIGHT FIXTURE
ASSEMBLY
LED MEDIUM
BASE BULBS
U.L. Model No.: LK52-1