− Only parts that comply with the original device data
may be used for repairs. This device contains electrical
and mechanical parts which are essential for providing
protection against sources of danger.
− Do not use the carpet cleaner with an external timer or
separate remote control system.
− Do not immerse the carpet cleaner or power cord in water
or other liquids.
− Never touch the power plug with wet or damp hands.
− Do not pull the power plug out of the socket by the cord;
instead, always pull it out by the plug itself.
− Never move, pull, or carry the carpet cleaner by its power
cord.
− Keep the carpet cleaner and power cord away from open
flames and hot surfaces.
− Lay the power cord so that it does not pose a tripping
hazard.
− Do not kink the power cord and do not lay it over sharp
edges.
− Only use the carpet cleaner indoors. Do not use the carpet
cleaner in the rain.
− Never reach to retrieve an electrical device if it has fallen
into water. In such a case, immediately disconnect the
power plug.
− Never insert any objects into the housing.
− Always switch the carpet cleaner off and unplug it when
you are not using it, when you intend to clean it, or in the
event of a malfunction.
− To reduce the risk of electric shock, this carpet cleaner has
a polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
Safety
9