Easy Home VC9389A Manual Del Usuario página 8

Carpet preparation
1. Check to make sure that all components and accessories have been
received (see Fig. A and B).
2. Take the carpet cleaner out of the packaging and check whether it or any of
the individual parts are damaged. If this is the case, do not use the carpet
cleaner. Contact the manufacturer via the service address indicated on the
warranty card.
Carpet cleaner assembly
CAUTION!
Risk of injury!
Improper handling of the carpet cleaner may cause injury.
− Do not plug the carpet cleaner in until it is fully assembled.
− Do not operate the carpet cleaner without the handle
being firmly screwed into place.
1. Set the carpet cleaner in an upright position.
2. Place the handle
cleaner.
Make sure that the power cord clip
the power cord hooks
3. Drive one screw
them snugly.
Do not overtighten the screws, as this could strip the screw
holes.
Carpet preparation
NOTICE!
Risk of damage!
Using the carpet cleaner as a dry vacuum will damage it.
− Only use the carpet cleaner with an appropriate carpet
cleaning solution.
12
1 firmly onto the main body of the carpet
16
12 .
14 into each side of the handle and fasten
is on the same side as