Hooking Up The Audio Components - Sony SCD-XA777ES Manual De Instrucciones

Hooking Up the Audio Components

Connect the Super Audio CD player to an audio
component. Be sure to turn off the power of all
components before making connections and connect
securely to prevent noise.
When you have an amplifier equipped with the 5.1CH
input jacks (multi-channel amplifier, AV amplifier, etc.)
and connect the player and the amplifier via ANALOG
5.1CH OUT jacks, you can play a multi-channel Super
Audio CD and enjoy the multi-channel playback.
For normal playback, connect the player and an amplifier
via ANALOG 2CH OUT jacks.
Connecting via ANALOG 5.1CH OUT jacks
Use audio connecting cords for this connection. Connect the
ANALOG 5.1CH OUT jacks (FRONT L/R, SURR L/R, CENTER,
SUBWOOFER) to the corresponding jacks of your amplifier. For
FRONT or SURR connection, use the connecting cords (Red and
White jacks) and be sure to match the colour-coded pin to the
appropriate jacks: white (left) to white and red (right) to red. For
CENTER and SUB WOOFER connection, use the connecting
cords (Black).
FRONT or SURR connection
Audio connecting cords (Red and White) (supplied)
White (L)
Red (R)
L L
R R
FRONT SURROUND
R
ANALOG
To FRONT IN
jacks (L/R)
White (L)
Red (R)
CENTER
5.1CH OUT
COAXIAL OPTICAL
OUT
DIGITAL(CD)
SUB WOOFER
L
2CH OUT
To SURROUND or
REAR IN jacks
To CENTER IN
(L/R)
jack
CENTER or SUB WOOFER connection
Audio connecting cords (Black) (supplied)
Black
Notes
• When you make the Multi-channel connection, connect the
ANALOG 2CH OUT jacks also using another audio connecting
cord so that you can play a CD (or SACD) when you set the
input selector of your amplifier to CD (or SACD) input .
• During playback of a conventional CD or a 2CH Super Audio
CD, no signal is output from the ANALOG 5.1CH FRONT L/R
jacks. Instead, the signal is output in high quality from the
ANALOG 2CH OUT jacks (see page 7). (SCD-XA777ES only)
• During playback of a conventional CD or a 2CH Super Audio
CD, the same signal that is output from the ANALOG 2CH
OUT jacks is also output from the ANALOG 5.1CH FRONT L/
R jacks. (SCD-XA333ES only)
• During playback of a Multi-channel Super Audio CD, no signal
is output from the ANALOG 2CH OUT jacks. (SCD-XA777ES
only)
• During playback of a Multi-channel Super Audio CD, the same
signal that is output from the ANALOG 5.1CH FRONT L/R
jacks is also output from the ANALOG 2CH OUT jacks. (The
down mixed signal of the Multi-channel signal is not played
back.) (SCD-XA333ES only)
• There are 5CH, 4CH, and 3CH Super Audio CD. When you
play these disc, the signal does not output from all the jacks of
the ANALOG 5.1CH OUT. For details of the playback, see the
cover or instructions of the Super Audio CD.
This illustration is for SCD-XA777ES. For SCD-
XA333ES, connect the same jacks of SCD-
XA777ES (see page 10).
To SUB WOOFER
IN jack
Black
AC IN
Multi-channel amplifier,
AV amplifier, etc.
5
GB