RIDGID SeeSnake Serie Manual Del Usuario página 8

SeeSnake
Monitor Controls – Brightness and contrast may be ad-
justed with the monitor controls. On the B&W version
there is also an image inverter and a Day/Night switch to
further adjust the image viewed on the screen. (Figure 6)
Contrast Brightness
Monitor Power
Figure 6 – Adjustment Controls for the B&W (Top) and
Color (Bottom) Monitor Screens
Multifunction
Button
Video
In/Out Jack
External
Power Jack
Figure 7 – Monitor Pack Rear Panel
Red Multifunction Button (Figure 7) – This button serves
the following functions:
• Press and quickly release to turn the system power
ON/OFF.
Table 1
Button Press Duration
Quick Press and Release (<
Medium Press and Release (
Long Press and Release (>4 sec.)
*LED Indicators - See Figure 8.
6
® Compact and Color Compact
Image Invert
Day/Night Switch
Connector for the
Interconnect Cord
Ground Reference
(Future Expansion)
Action
1 / sec.) Toggles Power ON/OFF
2
1 / – 4 sec.) Toggles SeeSnake In-Line Transmitter ON/OFF
2
Cycles through LED brightness levels, Release when
desired level is reached.
• Press and hold to cycle through the brightness set-
tings of the camera's LED lighting.
• Press and hold for ~1 sec. to activate or de-activate
the In-Line Transmitter (See Table 1 for detailed in-
structions.)
NOTE! The B&W camera head uses infrared LEDs that
are invisible to the human eye; changes to the
brightness level will only be visible on the monitor
screen.
LED Indicator (Figure 8) – The LED indicator next to the
monitor screen indicates the following operational condi-
tions:
RED • Steady Glow – Power ON
RED • Steady Flashing – Indicates low battery status
when running off the optional battery pack
RED • Flash S-O-S (3 short, 3 long, 3 short) pattern in
Morse Code – no video signal from the camera
head
WHITE • Steady Flashing – In-Line transmitter is active
RED • Rapid Flashing slowing from 8 to 4 flashes, 2
flashes, 1 flash, While pushing the red multifunc -
tion button, indicates changes to the brightness
level of the camera's LED lighting. (Table 1)
(Red)
LED Indicators
Figure 8 – LED Indicator Panel
(White)
LED Indicators*
Red - Lit/Unlit
White - Flashes slowly
Red - Rapid flashing slowing
to 4 flashes, 2 flashes, 1 flash