Test Your Call Connection - Motorola COMMAND ONE Manual De Instrucciones

Note: When prompted for the passkey,
enter 0000.
When your headset successfully pairs with
your phone, you hear "pairing complete".
To connect to both phones, turn on the first
phone while the second phone is connected.
When you hear "<phone 1 name>
connected", your headset is connected to both
phones.
Tip: You have 20 seconds to turn on your first
phone. If reconnection fails, turn your headset
off and on.

Test your call connection

1 Place the headset on your ear.
2 On your phone, dial a phone number and
press the Call/Send key.
If your phone and headset are successfully
connected, you hear ringing on the headset.
10 Pair & connect