Go Rhino 917000T Instrucciones De Instalación página 8

INSTALLATION INSTRUCTIONS
STEP # 5
•Tighten all front and rear tube bolts to 26 ft/lbs Max. DO NOT OVERTIGHTEN BOLTS
•Check and retighten all nuts and bolts periodically.
•Attach the sport bar using (3) 3/8" bolt plates, (3) 3/8"
lock washers and (3)3/8 " x 1 1/4 " flat head bolts, per
side.
© 2016 Go Rhino Products. All rights reserved
•Apply automotive primer to any exposed
metal.
•Place the sport bar over drilled
mounting holes using the mounting base
spacer as shown, both sides.