Clatronic BS 1228 Instrucciones De Servicio página 40

5....-05-BS 1228
Upholstery/Brush Nozzle:
GB
Damper
Open the damper on the hose handle to adjust the airflow or to release objects clin-
ging to the nozzle.
Filter:
Your machine has three filter systems.
1. Transparent dust collection container
• The traditional dust bag system has been replaced by a transparent dust collec-
tion container in which coarse dirt particles and tiny particles floating in the air
are swirled out of the suction air by the high speed of the air current.
• The quantity of dust can be easily read off at any time on the container, which
is also very easy to empty.
• The purchase of dust bags is no longer necessary.
2. Motor Protective Filter (in the Dust Container)
Once the dust level has reached the MAX mark on the dust container, please pro-
ceed as follows:
1. Remove the dust container (see illustration 1).
2. Remove the contents of the dust container (see illustration 2).
3. Remove the filter insert (see illustration 3) and clean the motor protective filter
by knocking out and gentle brushing.
4. Now replace the components.
Every third time the dust container is emptied, or in the case of severe soiling,
clean the filter by allowing water to flow through the filter fabric against the direction
in which the vacuum cleaner blows. The dust container should only be reinserted
when it is completely dry!
3. Outlet filter (Hepa Filter):
The appliance is also equipped with an outlet filter.
• We recommend replacing the filter every 6 months in order to guarantee
perfect working order.
• You will find this filter on the left side of your machine behind a ventilation grid.
• Open the ventilation grid by pulling the lever next to it.
• Remove the filter and replace it with a new filter.
40
04.12.2002 9:43 Uhr
Please note that the upholstery/brush nozzle is a "two-
in-one" attachment. For upholstery please use the
nozzle without the attachment. The brush attachment is
hooked under the upholstery nozzle.
Seite 40